Troubleshooting

***Download the Printable guide here   JPEG   (Right click and save it...)

Step - ONE

Pull the power cable out of the groove in the lamp base.

Step 1 - Pull the power cable out of the groove in the lamp base.

Step - TWO

Rotate the white insert clockwise until the flat edge is in line with the flat edge of the lamp base.

Step 2 - Rotate the white insert clockwise until the flat edge is in line with the flat edge of the lamp base.

Step - THREE

The white insert and bulb fixture is then removed from the lamp base.

Step 3 - The white insert and bulb fixture is then removed from the lamp base.

Step - FOUR

The bulb is removed from the fixture by pulling the bulb firmly away from the fixture.
Replace with the new bulb by plugging the two pins into the socket on the fixture. (There is no wrong way round for the bulb).

Step 4 - The bulb is removed from the fixture by pulling the bulb firmly away from the fixture. Replace with the new bulb by plugging the two pins into the socket on the fixture. (There is no wrong way round for the bulb).

Step - FIVE

The fixture and insert is ready to go back into the lamp.
Line up the flat edges of the white insert and lamp.
Rotate the insert around until the cable can be pushed back into the groove on the lamp base.

Step 5 - The fixture and insert is ready to go back into the lamp. Line up the flat edges of the white insert and lamp. Rotate the insert around until the cable can be pushed back into the groove on the lamp base.